Wiring and Settings for Water Underfloor Heating
SECTION 3 – WIRING
3.1.
A fused spur should be provided adjacent to the manifold to provide power to the pump and two port zone valve if fitted.
3.2
To comply with IEE regulations, the pump on the Manifold Control Pack
must be provided with an earth. All wiring should be undertaken by a qualified installer and
must conform to IEE regulations.
SECTION 4 – SETTINGS
4.1.
The mixing valve supplied as part of the Manifold Control Pack has a
temperature setting range as detailed below.
Min
40ºC
45ºC
50ºC
55ºC
60ºC
Max
The temperature control is factory set in the adjustable position and at the minimum temperature (35ºC)
