Cookie settings

Choose which optional cookies we can use. You can change this at any time from the link at the foot of every page.

News

Guides, installation write-ups and technical notes from the team at Underfloor Heating Systems.

  • News

    Underfloor Heating Manifolds Positions

    Careful consideration should be given to the location of the underfloor heating manifolds at the inital stage of the project. Underfloor Heating manifolds should be located as centrally as possible in the building so that the lenghts of the pipe routing between manifolds and…

  • News

    Warm Water Underfloor Heating

    Passive self-regulation for underfloor heating Although underfloor heating systems are used in association with temperatures controls with different degrees of sophistication, the underfloor heating system provides its own…

  • News

    Underfloor Heating, Chippenham, Wiltshire

    55 sqm concrete floor underfloor heating for Chippenham. Four underfloor heating zones. As below; – Family room – 110 m – one room thermostat

  • News

    Underfloor Heating, Barnsley, Yorkshire

    75 sqm underfloor heating system with six programmable digital room thermostats. Our local underfloor heating installer for the north of england will install the underfloor heating system.

  • News

    Underfloor Heating, France

    150 sqm screeded underfloor heating for France. Three underfloor heating zones and a 7 circuit manifold.

  • News

    Underfloor Heating Mixing Valve Set Up

    The thermostatic blending valve of our underfloor heating systems has a number of preset temperature settings. These range between 35°C and 60°C, as shown below:

  • News

    Danfoss Wiring Centre FH-WC Technical Information

    The FH-WC offers an eight zone wiring centre for underfloor heating systems that use hard-wired thermostats. With each of its eight outputs, the device can connect thermal actuators…

  • News

    Underfloor Heating Fault Finding

    FAULT FINDING SHEET In the event that your underfloor heating (UFH) system is not working correctly, here are some points to check to help find the cause of…