Cookie settings

Choose which optional cookies we can use. You can change this at any time from the link at the foot of every page.

News

Underfloor Heating & Hot Water Control

By Leif

The UH1 underfloor heating wiring centre also takes care of the hot water control. Controlling the hot water from the UH1 underfloor heating Heatmiser wiring centre makes sense, not only because it simplifies the wiring, but also because it enables you to control your hot water centrally from the Heatmiser underfloor heating TouchPad and remotely from the NetMonitor system.

The UH1 underfloor heating wiring centre can control up to eight underfloor heating zones. 12 V programmable room thermostats in each room are used to control the different water underfloor heating zones.

Optional central control and internet access are available. Zone 8 can also be used for controlling the radiators. Internet control comes from the Heatmiser NetMonitor system. Telephone control comes from the Heatmiser TR2 system. Computer control comes from the Heatmiser PCLink.

All posts
  • News

    Accessories For Underfloor Heating Systems

    We offer a range of accessories for our water underfloor heating systems. 12v Power Supply unit can be used to power our low voltage underfloor heating room thermostats.

  • News

    Underfloor Heating Outputs and Heat Losses

    Water underfloor heating outputs are quoted in W/sqm. The maximum underfloor heating output for underfloor heating in a concrete floor is 100 W/sqm, the maximum heat output for…

  • News

    Underfloor Heating Automatic Bypass Valve

    Normally the underfloor heating flow rates per underfloor heating water loop is between 1 – 4 l/min. The flow rate for the water underfloor heating system can be…