This Nordic Pro 2 kit includes:
- 200 metres of Henco multilayer pipe 16 x 2 mm – PEX/AL/PEX
- 2-circuit manifold with pump and mixer:
- Includes a high quality Watts 2-circuit manifold with flow regulators, on/off valves, filling valves and ball valves
- Also includes a Control pack for mixing the water temperature entering the underfloor heating system – with a Grundfos UPM3 pump (replaces the UPS2 pump pictured) and a Highflow RWC mixing valve
- Two (2) Heatmiser Slimline programmable room thermostats
- A Heatmiser UH8 wiring centre
- Two (2) thermal 230V actuators
- Four (4) eurokonus compression fittings for connecting pipe to the manifold
- 600 clips for fitting the pipe onto the insulation
- Tools – pipe cutter and calibration tool (one each)
- Installation manual
Superior 50 YEAR GUARANTEE on pipe !
You are viewing a 2 zone system for 35-40 m2.
Screeded floors: Choose this kit if you have two rooms and neither room is larger than max 25 m2. Manifold needs to be located near both zones. Using an average pipe spacing of 200 mm, this kit covers 40 m2 in screeded floors. For a maximum 25 m2 room you will have to increase pipe spacing to 250 mm, while you instead can decrease the pipe centres for the other (smaller) room.
Additional notes: 250 mm pipe spacing is not recommended for projects where a heat pump may be used as heat source.
Timber suspended floors: As more pipe per m2 is required for joisted floors this kit covers only up to 36 m2. The larger room should be maximum 20 m2.
Before placing your order please make sure that this kit is suitable for you. If you are not completely sure please contact us first so that we can confirm you are looking at the correct size system. A telephone call could save you the inconvenience of having to return parts of your order and delaying your installation.