Our underfloor heating pipework is from HENCO in Belgium. It is approved for 10 bar pressure and 95 degree C water temperature, one of the best approvals you can have for an underfloor heating pipe. The aluminium layer makes sure that the underfloor heating pipe is 100 % oxygen diffusion tight. Our HENCO underfloor heating […]
One of our many available products is the Single Room pack, ideal for extensions and conservatories. It can work as part of the radiator system or it can have a separate feed from the heating source (which is the recommended practice). Any wet underfloor heating system will work best as a separate system with S-Plan […]
Wet underfloor heating is very energy efficient. Having underfloor heating installed will reduce your energy bills and keep your feet warm. The heat will only be circulated in the rooms where it is required. Each room will have it’s own room temperature control. No ugly radiators to be fitted on the wall, you will have […]
Once a wet underfloor heating system has been installed there is really nothing to do for the client. The client/end user only needs to set the room thermostats to work as they prefer them to work. Wet underfloor heating systems will normally start 2 – 3 h before a radiator systems in a screeded floor, […]
Most underfloor heating systems above 25 sqm will need an underfloor heating manifold. The underfloor heating manifolds should be located centrally in the building. Normally one manifold can do up to 180 – 200 sqm floor area depending on the floor layout. A normal four bedroom property will have one manifold for each floor. Our underfloor […]