RWC Underfloor Heating Manifolds

The stainless steel Reliance underfloor heating manifold

The Reliance Worldwide stainless steel underfloor heating manifolds are made to the highest quality possible.

The water underfloor heating manifolds now include Swiss made flowmeters from Taconova.  The Taconova flowmeters are seen as the best in the world.

Above picture shows a recently installed RWC manifold with ThermoGuard mixing valve,  with a fresh limecrete screed laid over pipes.

The manifolds comes with 1” blue and red isolation ball valves and 1” fill/drain valves (in the same colour).

The return bar have manual caps for adjusting the loops. When these are removed, actuators can be fitted for individual room control with room thermostats.

The manifolds are supplied pre-mounted on installation brackets for easy fitting.

Connections on the manifolds are of eurocones thread.  These can take any pipe sizes from 12 x 2 mm up to 20 x 2 mm pipe.  Our pipe is 16 x 2 mm as this has been proven to be one of the best sizes to use for wet underfloor heating systems.

The Taconova flow meters also work as isolators for each loop, which is very handy for fault finding or if one loop needs to be closed.

Manifold sizes are available from 2 ports up to 12 ports.  Manifolds bodies are made of 304 Stainless Steel.

Here at Underfloor Heating Systems Limited we are very proud of using flowmeters made in Switzerland as the quality is truly the best.