Category: Case Studies

  1. Case Study: Palmers Green, Worcester, WR2 4JY

    Underfloor heating installers and suppliers   Project type: Extension and renovation. UFH throughout the ground floor Heated floor area and number of zones:  90 m2, 5 zones Heat source:  boiler Pipe centres:  200 mm cc throughout using Henco 16×2 mm Pex/Al/Pex pipe Floor construction:  concrete (screeded) floor throughout with pipe clipped onto insulation.   Above […]

    Read more /

  2. Underfloor heating installation in pictures: Main Street, Charlton, Banbury, OX17

    Underfloor heating Oxfordshire   Project type: Rear extension and bathroom renovation. Heated floor area and number of zones:  35 m2, 2 zones Heat source:  boiler Pipe spacing:  200 mm cc Floor construction:  concrete (screeded with sand cement screed) floor throughout with pipe clipped onto insulation.   Pictures of a recent installation during the cold winter […]

    Read more /

  3. Case Study: Desford Road, Newbold Verdon, Leicestershire, LE9

    Underfloor heating Leicestershire One of our recent wet underfloor heating installations – in pictures     Project type: Ground floor pipe in screed installation approx. 120 m2. Heat source:  boiler Pipe centres:  200 mm cc Installation method:  Pipe (in screed) clipped onto insulation.   Above and below:  Bedroom with adjacent en-suite and dressing room (manifold […]

    Read more /

  4. Case study: Pool Lane, Brocton, Stafford, ST17

      Underfloor heating Stafford   Project type: Rear extension and renovation. One large room approx. 30 m2. Heat source:  boiler Pipe centres:  150-200 mm cc Mixed floor construction:  new part concrete (screeded) floor while existing part of the room was timber suspended.  Pipe clipped onto insulation.     With domestic house extensions we’re often asked […]

    Read more /

  5. Case Study: Richmond Place, Bath, BA1

    Underfloor heating Bath   Project type: Rear extension and renovation. UFH throughout the ground floor Heated floor area and number of zones:  35 m2, 2 zones Heat source:  boiler Pipe centres:  200 mm cc throughout Floor construction:  concrete (screeded) floor throughout with pipe clipped onto insulation.   During early February we were asked to install […]

    Read more /

  6. Case Study – Michael Johnson

    Underfloor heating Leeds March 2017. Everything is working fine and we are very happy with the underfloor heating. In early 2013 we purchased a bungalow with the idea of building a house. The house was going to be on the same footing in terms of size 128m2 as the bungalow and my initial concerns were heating […]

    Read more /

  7. Case Study: Ladoc Road, Keynsham, Bristol, BS31

    Underfloor heating Bristol     Project type: Extension and renovation. UFH throughout the ground floor Heated floor area and number of zones:  69 m2, 4 zones Heat source:  boiler Pipe centres:  200 mm cc throughout Floor construction:  concrete (screeded) floor throughout with pipe clipped onto insulation.     Thanks to our client’s preparation and decision […]

    Read more /

  8. Case Study: Underfloor Heating in London

    Underfloor heating project in Cotswold Gardens, London, NW2   Project type: Extension and renovation. UFH throughout the ground floor plus first floor en-suite. Heated floor area and number of zones: 67 m2, 3 zones Heat source: boiler Pipe centres: 200 mm cc throughout Floor construction:  concrete (screeded) ground floor, timber suspended first floor   The […]

    Read more /